
Adv Engi Tech
An international, peer-reviewed, open access journal of engineering, technology and engineering management, published online since 2016
DOI 10.21065/AdvEngTech · Abbreviation: Adv Eng Technol · Published annually in English
Advanced Engineering and Technology publishes rigorous research across the engineering sciences. It links engineering with the physical sciences and with the management of technology and innovation. The journal covers a wide range of fields, from electrical, mechanical and civil engineering to materials, earth resources, architecture and design. Its core interest is material modelling and material response.
The journal values work that advances theory, research methods and engineering practice. Interdisciplinary studies are particularly welcome. All articles are free to read, download and reuse from the day of publication.
Title: Advanced Engineering and Technology
Abbreviation: Adv Eng Technol
Journal DOI (Crossref): https://doi.org/10.21065/AdvEngTech
Zenodo DOI: https://doi.org/10.5281/zenodo.15098508
First published: 2016
Frequency: Annual (articles published online on acceptance)
Format: Online only
Language: English
Peer review: Double-blind, at least two reviewers
Licence: CC BY 4.0
Copyright: Retained by authors
Publication charges: No submission fee; APC CA$100 (after acceptance)
Submission system: Open Journal Systems (PKP)
Publisher: Consortium Publisher – ICDTD Inc. (Intellectual Consortium of Drug Discovery and Technology Development Inc.), 6660 Kennedy Road, Mississauga, ON L5T 2M9, Canada
Contact: office@consortiumpublisher.ca · +1 (647) 526-0885
The journal publishes original work that explains how engineered materials, devices, structures and systems behave, and how they can be designed, built and managed to perform better. It values research that links a clear engineering question to sound theory, modelling or experiment, and draws conclusions that are useful to engineers, industry and policymakers.
The journal aims to:
Publish reproducible research across the engineering sciences, with particular interest in material modelling and response.
Connect theory, simulation and experiment with practice in industry, infrastructure and design.
Encourage interdisciplinary exchange, so that a method or finding in one branch of engineering informs work in another.
Make every article openly available, so that researchers, engineers, educators and students everywhere can use it without cost.
Within scope: studies that address a defined engineering problem with appropriate methods, validation and analysis. This includes experimental work, analytical and numerical modelling, simulations validated against data or established benchmarks, design studies with performance evaluation, and systematic reviews.
Outside scope: product descriptions or promotional material, design or project reports with no research question or evaluation, and simulations with no validation. Studies whose conclusions rest on data, code or models that are not made available for review are also outside scope.
The subject areas are grouped into seven themes. They run from the materials and devices that engineering builds on, to the systems and infrastructure made from them, to the way technology is designed and managed.
1. Electrical, electronic and computer engineering. Electrical engineering, electronics, electricity and magnetism, computer science and engineering, software engineering, information technology and artificial intelligence. This theme asks how energy, signals and information are generated, processed and controlled.
2. Mechanical, manufacturing and control engineering. Mechanical engineering, mechanisms, industrial and manufacturing engineering, mechatronics and control engineering, and robotics. This theme asks how machines and production systems are designed, automated and controlled.
3. Materials, chemical and process engineering. Chemical engineering, metallurgical and materials engineering, polymer and process engineering, polymerisation, and material modelling and response. This theme asks how materials and processes behave under load, heat and reaction, and how they can be designed to perform.
4. Civil, transportation and environmental engineering. Civil engineering, transportation engineering and management, and environmental engineering. This theme asks how infrastructure and transport systems are built, operated and made sustainable.
5. Earth resources engineering. Earth sciences and engineering, mining engineering, geological engineering, and petroleum and gas engineering. This theme asks how earth resources are located, extracted and managed safely and efficiently.
6. Architecture, planning and design. Architectural engineering and design, architecture, city and regional planning, and product and industrial design. This theme asks how buildings, cities and products can be designed to work well for the people who use them.
7. Engineering and technology management. Technology and innovation management and engineering management. This theme asks how technology, innovation and engineering projects are planned, managed and brought into use.
Work from academic, industrial and government research is welcome in every theme.
Original research article: reports new experimental, analytical or computational findings that address a defined engineering problem.
Review article: critically synthesises published evidence on a topic and identifies open questions. Systematic reviews should follow PRISMA.
Case study: analyses a specific project, failure, system or installation in depth and draws lessons that apply beyond the case.
Methods and techniques: describes a new or substantially improved method, procedure or characterisation technique, with validation data.
Short communication: reports a focused, significant finding that does not need a full article.
Commentary or perspective: offers an evidence-based viewpoint on a current issue in engineering or technology.
Letter to the editor: responds briefly to an article published in the journal.
All article types are peer reviewed except editorials, letters and corrections.
Advanced Engineering and Technology is a fully open access journal that follows the Directory of Open Access Journals (DOAJ) definition of open access. All articles are free to read immediately on publication, with no subscription, registration or embargo.
Licence. Articles are published under the Creative Commons Attribution 4.0 International licence (CC BY 4.0). Anyone may read, download, copy, distribute, print, search or link to the full text, crawl it for indexing, pass it as data to software, or use it for any other lawful purpose, as long as the original authors and source are properly cited. The licence statement appears on every article page and in the article PDF.
Copyright. Authors keep copyright of their work without restriction and grant the journal the right to publish it first. Authors may deposit any version of their article, including the published version, in institutional or subject repositories at any time.
Third-party material. Authors must get permission for any figures, drawings, tables or text reused from other sources and label them with their original licence.
There is no charge to read any article, and there is no submission fee.
Article processing charge (APC): CA$100. It is charged only after a manuscript is accepted, never for submission or review. The APC applies to manuscripts submitted from 1 July 2026. Manuscripts submitted up to 30 June 2026 are exempt.
The APC never influences editorial decisions. Full or partial waivers are available on request for authors from low- and middle-income countries and for authors without funding.
Every research and review manuscript is assessed by at least two independent expert reviewers under a double-blind model. Reviewers do not know the authors’ identities, and authors do not know the reviewers’. Decisions rest on the soundness of the engineering question, methods, validation and analysis, on ethical compliance and on contribution to the field, not on the expected impact or citation of the work.
Editorial independence. An editor with a conflict of interest in a manuscript does not handle it. This includes manuscripts from the editor’s own institution and the editor’s own submissions. Such manuscripts are assigned to another editor and reviewed under the same process. The publisher does not take part in editorial decisions.
The journal follows the Core Practices of the Committee on Publication Ethics (COPE).
Originality and plagiarism. Every submission is screened for text similarity before review. Plagiarism, duplicate publication and redundant publication lead to rejection or, after publication, retraction.
Data and image integrity. Data, figures, micrographs and simulation results must not be fabricated, selectively reported or altered in ways that misrepresent the findings. Editors may request raw data, original images or model files.
Reproducibility. Methods must be described in enough detail for others to repeat the work. This includes materials, equipment, test conditions, software, model parameters and boundary conditions. Quantities should be reported in SI units.
Research with human participants. User studies, surveys and interviews must have approval from a named research ethics board and record informed consent, following Canada’s TCPS 2 or an equivalent national standard.
Authorship. Everyone listed as an author must have made a substantial contribution to the work and approved the final version. Authors are encouraged to describe each contribution using the CRediT taxonomy and to provide an ORCID iD.
Conflicts of interest and funding. Authors must disclose all funding and any financial or professional interest that could affect the work. This includes patents, consulting roles, employment, and commercial interests in products or technologies studied.
Data and code availability. Each article includes a data availability statement. Where possible, data, code and models should be shared in a public repository. Where they cannot be shared, the statement explains why and how they can be accessed.
Use of artificial intelligence. AI tools cannot be listed as authors. Any use of AI in research or writing must be disclosed in the Methods or Acknowledgements, and authors remain responsible for all content.
Corrections and retractions. Errors are corrected through linked correction notices. Retractions follow COPE guidelines and remain openly accessible, with the reason stated.
Complaints and appeals. Authors may appeal a decision by writing to the editorial office with their reasons. Concerns about published work are handled according to the COPE flowcharts.
Every article receives a permanent Digital Object Identifier (DOI) registered with Crossref under the journal DOI 10.21065/AdvEngTech. The DOI means an article can always be found and cited, even if web addresses change. Journal records are also deposited in Zenodo (https://doi.org/10.5281/zenodo.15098508).
Machine-readable metadata. Article metadata is exposed through the OAI-PMH interface of Open Journal Systems and deposited with Crossref, so indexing services and software can harvest it. The metadata includes titles, authors, affiliations, abstracts, references, licence and funding.
Manuscripts are submitted and processed online through Open Journal Systems (OJS), developed by the Public Knowledge Project (PKP). Authors can follow each stage of review in their account. The journal is published by Consortium Publisher – ICDTD Inc., Canada. Its website is hosted on Bravo Journal Systems (BJS) of Bravo Skills College, Port of Spain, Trinidad and Tobago.
Before submitting, please read the Author Guidelines and prepare a cover letter. Include statements on ethics approval, funding, conflicts of interest and data availability.